Engineering panels
Raw particleboard
| DIMENSIONS | length v mm | width v mm |
|---|---|---|
| Basic format | 2 800 | 2 070 |
| Maximum format | 5 600 | 2 500 |
| Thickness | 8/10/12/15/16/18/19/22/25/28/32/38 | |
| Minimum order quantity | 1 truck (30 m3) | |
| Notes | Dimensions can be combined on a truck | |
| The minimum quantity from one dimension is 10 m3 | ||
Particleboard is a composite material made from wood particles, such as wood chips, shavings or sawdust, which are bonded with a synthetic resin or other suitable binder and further pressed and extruded. Due to their high absorbency, chipboard products are a suitable material for interiors with a dry environment. To improve the mechanical properties of the particle board, they can be further modified (eg by lamination, veneering, varnishing and covering with natural or artificial plywood).
Technical specification
| Property | Testing method | Requirement |
|---|---|---|
| Tolerance for thickness | STN EN 324-1 | ± 0,3 mm |
| Tolerance for dimensions | STN EN 324-1 | ± 5,0 mm |
| Tolerance for rectangularity | STN EN 324-2 | ± 2 mm / m |
| Swelling | STN EN 317 | max. 8% after 2 hour |
| Moisture | STN EN 322 | 5% – 13% |
| Formaldehyde leakage | STN EN 120 | < 4 mg / 100 g samples |
| Degree of falmmability | STN 730862 | C 2 – middle combustible |
| Thickness area | > 6 >13 >20 >25 >32 | |
| <13 <20 <25 <32 | ||
| Bending stregth | STN EN 310 (MPa) | 14 13 11,5 10 8,5 |
| Tensile strength | STN EN 319 (MPa) | 0,40 0,35 0,30 0,25 0,20 |
| Surface gripping | STN EN 311 (MPa) | 0,8 |
| Modulus of elasticity | STN EN 310 (MPa) | 18 001 600 150 013 500 000 |
Characteristics
- High flexural tensile strength
- resistance to abrasion, scratches, impacts and chemicals
- good workability
- quick and easy installation
- The resulting material has a homogeneous composition and the density therefore shows good mechanical properties during cutting
Usage
- furniture production
- interior equipment
